• Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About ilowe

  • Rank
    Active Member

Profile Information

  • Gender
    Not Telling
  1. One piece of anecdotal evidence that may help. In my case, turning off the modem then cold booting then waiting until there were no more programs to load, avoided all the problems with EIS.
  2. I tried turning off the modem before booting this morning. I noticed that several services in the tray, bottom right, took over two minutes to load once the main booting had taken place. All the time these services were loading, EIS was flashing that it was trying to update, even though there was no internet connection! During this two minutes, if I tried to start a few other programs, they took ages. I sure am glad I no longer have these other programs in startup. Eventually EIS calmed down, and I was able to get my regular programs loaded. Then I turned on the modem, and about 5 minutes later I had the EIS message of update success. Several times over the last 25 years I have saved a computer by simply delaying the programs. This includes once adding a 10 second delay in the bios settings of a HP laptop. I wonder: current EIS problems, many of them could be solved by building in some options for delays. You could start with delaying for five minutes the auto-update. NB NOT just delaying until the CPU reduced to less than 20%.
  3. For several weeks I have noticed that EIS partially jams up the system upon cold reboots. I run a desktop and always shut down at night. It is the cold starts that lead to hangs. For instance, when I try to start My Computer, while EIS says it is still updating, the program does not start, or I get the white screen. EIS reports "100% " for over a minute. This morning I also had most of my my icons moved to the second screen -- not for the first time. In my case, I wonder if the problem is the updates, not the program itself. Is there a setting somewhere to automatically delay updates till five minutes after booting? I am tempted to turn off my modem next few times I boot, since hopefully EIS will only try to update if there is a connection.
  4. ilowe

    EAM preventing W7 from booting

    See my thread in the forum for the suite. I have a similar problem. Ilowe
  5. The new version was worth a try. It was just like the last version: updates failed, both during the installation, and when I initiated them manually. In each case I tried several times, since I have an erratic internet connection. My email for instance sometimes times out, but usually works with a second or third attempt. I did not risk a reboot . I uninstalled. Sad. At least now we know that the problem is with the antimalware part of the program, not the firewall.
  6. Sorry to not work on this for a few days. The BSOD creator does not work even before EIS is installed. Just in case, I found and ran your cleaner, to make sure there were no previous versions still lingering. The cleaner found nothing. I have used some other virus finders. The bitdefender site showed the problems when the installed language of my computer, and my location, are detected and programs insist they know better than I do. It insisted on keep changing back to non-English. At least your site allows fixed choice. I tell you, the monolinguals among you do not understand the battles such automation gives us multilingual users. I run a French Version of Windows 7, installed with a French keyboard. I use USA international software keyboard and touch type, and guess when I need to. Google defaults to the country I am in and is difficult to fix, though possible (there are some settings to force it to use google uk), and google docs and google books insist on giving me Arabic -- with the language change settings hidden, they are written in small print Arabic. This has relevance. I have used ccleaner to make sure there are no registry problems. I have been in to services.msc and switched to manual, two services that just might be giving problems, since they are unusual: Casper and Witopia. I downloaded the latest version of EIS. Just maybe the program change you made which gives me problems, has disappeared. Instead, I get new problems. They actually first occurred a few days ago but I did not document them, In the installation steps, you will note that a choice of language was not offered. Now you will see why this is important. I will have to give you the messages in French. At an early stage, the question of update was asked. I agreed. A new screen opens up, and stops. When I looked closer, there was a button, bottom left, which began with the word "retenter" ie re-attempt. The update started, then reverted to the same screen. My internet was working. I tried several times, then pressed the button, bottom right, "suivant" and finished the installation. As I finished in the middle of the right edge of the screen the EIS message box popped up. I have a screenshot but cannot seem to be able to paste it. It said: Une erreur de traitement interne inattendue s'est produite. Veuillez contacter l'assistance" I saw the general message, the computer is partially protected. I tried, from here, to do the updates. I got the same error message. So, what I had wanted to do was one last attempt to see if EIS worked. What puzzles me is that I have a new computer, with very little installed on it. The computer is well known, a popular buy. It is Win7 which is well known. Now you see why the developers really need to allow the user to use a previous version of the software. All this would have been solved in a few minutes, weeks ago, if this old option had been retained. OK, now you only have one customer, me, who seems to have this problem. I am guessing that I am probably not alone, and other customers have not bothered, and have simply abandoned Emsisoft. Yes, you as a company have a right to allow that to happen. You have the right to refuse to help us, and to refuse our custom. Therefore, please take this kindly, I am strongly requesting that Emsisoft reconsider. Right now it is only a few people affected. But what happens when 10% are broke? That is a business breaker! The option to default to the last known good version of the program would get you out of the problem since most customers would happily wait a few weeks before upgrading, and buy you the time you need to fix the problem. I have just now tried the same problem happens when I installe just the Antimalware. I was prepared to go down to just using the Antimalware, and using for instance glasswire, as an enhanced firewall. I can inform you that when I installed EAM then the same updates problem happened. I uninstalled. I did not want a system freeze.
  7. i forgot to say. When things jammed up, even the time, bottom right, failed to move. Might be significant
  8. Thanks. I found an old keyboard. Ran bellavista as you said. Applied the settings, rebooted. Installed EIS. Disabled startup firewall and set the services to manual. Rebooted. Basically the same as before. i could reboot. I loaded process explorer so I could see new programs starting. Double clicked on EIS icon. Saw that a2start and a2service were working. The HDD was flashing a lot, for minutes. Tried to create the BSOD and failed. Ended up powering down, and rebooting. Double checked bellavista. Rebooted. EIS start, and once again, bellavista failed me.This is the only time I have wished I had a BSOD! I am sending the settings file which I managed to copy elsewhere, by private message.
  9. I fail to see how I could create a BSOD even if I had an extended keyboard. I can install EIS. It seems to work, until I reboot, though I have not tested that extensively. I do know I can download the latest signatures and do an extended scan. Then I disable start firewall at boot, and change the service to manual. I rebooted. I started EIS, and once fully loaded, the system jammed. Not even Ctl-Alt-Del would work. Nothing reacted. So I had to power down, and cold boot, and faced the "Windows did not shut down normally" screen. This means that the problem is in that disabled service, presumably. The next step would have been to enable the firewall. So, the Ctl + Scroll lock creation of BSOD would not work, even if I did have the keyboard for it. since the problem seems to be with the service module (I could be wrong). I am stuck. What is strange is that this laptop is a standard one, well known, with very few programs loaded, and is fairly new, therefore not battered from loads of crashes and traces of badly uninstalled software. It has not had any other security software installed on it, and I keep close tabs on it using ccleaner etc. Would it help you if I sent a private message with a list of running programs, as from procexp.exe or similar? I have Nirsoft Utilities and Sysinternals suite.
  10. OK. Thanks. I really really appreciate your calm re-assuring advice and detailed help. I have two computers. The problem computer is running. So we can work methodically. 1. My laptop does not have Scroll lock, So how cal I use bellavista? 2. I am game to try the alternative batch files. I think I could simply act normally until windows jams. Then it would need a forced reboot. Would that be good enough? I have searched my computer and there are no dmp files lying around so far as I know. I will try to send the private message to request a longer trial licence. Thanks. I have a second licence, but to keep activating it, getting it right each time. Better to stay in trial version until the dust settles.
  11. OK. Thanks. Successfully installed the hotfix. Ran it for a while, so that is stable. Just now, I created a system restore point, just in case, and just in case that works (sometimes does, and is useful, never worked out why sometimes works. Figure that a new one manually created is most likely to work). I installed EIS. I let it update. Noticed MSE was not turned off -- I expected EIS to do that automatically, but left it alone. I did a Malware scan, nothing showed. I unchecked the box in general tab of settings, to do with start firewall. I used services.msc to find and set to manual the service you mentioned -- it had another name. Then I did a cold boot. It loaded in reasonable speed, ie it actually got past the logon screen. I did not test much, not sure but I think the computer was working normally. I noticed MSE was NOT turned off. I then double clicked on the EIS icon. It took ages, maybe two minutes, then I got the EIS splash screen. By now I was getting excited. Then. I minimised it, and the computer jammed. Not even Ctl-Alt-Del would work. So, I pressed the power button for a forced shut down. Waited, then restarted. I accepted normal boot. I was able to get past the logon screen. Then tried to uninstall. For some reason zsoft uninstaller could not find your program, and i tried several names. I had to use the microsoft method, which on a French computer like mine, is rather hidden! Uninstall took ages, but seemed to work. Current list of bugs that need fixing: 1. Any program at installation should automatically ask which language to use. Changing later was easy to find, and worked without reloading, but you cannot assume that because I am using a French computer that I understand computerspeak in French. 2. I chose to use the trial version for this kind of fiddling, rather than fiddle with matching to the second licence. I see I only have 5 days left. Many other programs allow days of use to count for the trial, and this allows people to try out the program over several months if need be. I am now running out of time. So, this gives you a major clue as to where the problem is. What do you suggest I do now? At least I can try another install and collect some data and uninstall without having to use safemode.
  12. This time I got them. Last time I tried I did not. I downloaded all three of them. It came in three versions. Platform i386 Platform x64 Platform ia64 Question 1. Which one do I use on Win7 32 bit, and which one do I use on the problem Win7 64 bit computer? Once I know, I will on Monday probably, then install EIS and set it to manual load first, as advised above. I will do a full scan of the computer. Then reboot. If it fails to reboot even when set to manual, then that gives some clues. Once manual is working -- already progress I can live with, I will try automatic loading. Question 2. How long should I wait before concluding it is not going to finish loading? I usually wait 5 minutes, and it usually takes around a minute. This is the time taken to go from signon screen to normal screen.
  13. Before you ask me to do something complicated. I was reviewing the problems just now. I do not have KB2958399 as the installer asks for. I cannot find it on the web. I do not have it for the problem laptop 64 bit, or for the desktop 32bit, never needed it. Perhaps there is no longer a need, but if that could be the solution!!
  14. Sorry, I forgot to reply to one of your questions. Even though I take notes when things happen on my computer, I cannot now trace the order of the problems. I cannot remember the sequence, vivaldi-redirects and EIS crashing the computer. I am off to work now, I will try and reconstruct the events sequence and let you know.
  15. Re the adverts. What I was seeing was, on the bbc site, and the dailymail news site, that when I scrolled down, I was being redirected to what I took to be virus sites. Other sites did not have that. It may have been videos. I did several checks. I used avira rescue boot disk to scan my computer. I updated vivaldi. I stopped all extensions. I also found that I did not experience the problem when I used vivaldi in no-images mode. Adblocker seemed to stop all that. My priority now is to find a solution to the main problem. From memory, I think I could, when EIS was installed, get to the screens. EIS seemed to work when installed, but jam up when there was a reboot. I had already talked to you earlier in the thread about a possible workaround where I try to start EIS after booting I have two computers, so if I get stuck can always contact you through the other one. My default is that in safe mode I uninstall EIS, then I am back to what I have now. Windows firewall plus MSE. So, since you are willing to work with me, I want to give it a try, for my benefit, and for the benefit of others.