JakeHardy 0 Posted April 18, 2013 Report Share Posted April 18, 2013 Hey everyone, i have a small problem with Emsisosft anti-malware, when a alert pop up saying the the program has changed i tick (Don't alert for update to this executable file), then press ok, but during the next update it happens again, i have gone to the guard and found the exe's(Don't alert for update to this executable file) is not ticked, when i do maunally tick it i think it stops alerting me Quote Link to post Share on other sites
GT500 854 Posted April 18, 2013 Report Share Posted April 18, 2013 May I ask what programs you are having this issue with? Also, is this just on Windows 7 x64, or is it on other versions of Windows as well? Quote Link to post Share on other sites
JakeHardy 0 Posted April 19, 2013 Author Report Share Posted April 19, 2013 Hello, i only have windows 7 x64 and it is every program the updates has the issue Quote Link to post Share on other sites
JakeHardy 0 Posted April 29, 2013 Author Report Share Posted April 29, 2013 hello? Quote Link to post Share on other sites
GT500 854 Posted April 30, 2013 Report Share Posted April 30, 2013 Please allow me to apologize for taking so long to get back to you. I thought I had already replied to your post on April 19th. I'll let our developers know about this, and see what kind of debugging information they would like me to collect for them. Quote Link to post Share on other sites
JakeHardy 0 Posted May 1, 2013 Author Report Share Posted May 1, 2013 Please allow me to apologize for taking so long to get back to you. I thought I had already replied to your post on April 19th. I'll let our developers know about this, and see what kind of debugging information they would like me to collect for them. ok, thank you Quote Link to post Share on other sites
GT500 854 Posted May 7, 2013 Report Share Posted May 7, 2013 Our developers have asked for a DebugView log. Before running DebugView, we'll need to set a registry entry that will tell Emsisoft Anti-Malware to output debug information that DebugView can see and save in its log. The following file eam_debug_output.zip contains two batch files. One of the will enable debug mode, and the other will disable it. Please download this file, extract the batch files from it, and run the batch file named eam_enable_debug_output (if your computer is running Windows Vista or Windows 7 then please make sure to right-click on the batch file and select to Run as administrator): After that, please restart your computer, and then proceed with the instructions below: Download DebugView from this link: When downloading, make sure to save it on your Desktop instead of clicking 'Run' or 'Open'. Right-click on the 'DebugView' file that you just saved on your Desktop, and select "Extract All". Before running DebugView, you will need to add a process exclusion to Emsisoft Anti-Malware to prevent crashing issues. Here are the instructions: Please go ahead and open Emsisoft Anti-Malware from the icon on the desktop. click on Guard in the menu on the left. Go to the File Guard tab. Click on the Manage whitelist link on the left, just above 'Alerts'. On the left, under where it says Type, click on where it says File and change it to Process. Click in the white space to the right of where you just changed 'File' to 'Process', under where it says Item, and a little button with three dots on it will appear to the right. Click on the button with the three dots. Navigate to the folder where DebugView is saved (this should be on your desktop), select the Dbgview file, and click the Open button in the lower-right. Click OK at the bottom to save the settings, and then close Emsisoft Anti-Malware. Open the new DebugView folder that was created on your Desktop after extracting. Windows XP and 2000 users should double-click on the file named 'Dbgview'. Windows 7 and Vista users should right-click and select "Run as Administrator". Click on the 'Capture' menu, and select everything except "Log Boot" (you will have to open the menu again after clicking to select an item). Do whatever it is you need to in order to replicate the issue with the warning about changes to a program. After that, please go to 'File' and save the log on your desktop. Please attach that log file to a reply so that we may analyze it for errors. You will need to use the More Reply Options button to the lower-right of where you type in your reply in order to access the attachment controls. Note: You may need to ZIP the log file in order to attach it. If you do not have a program such as 7-Zip, WinZip, WinRar, etc. then you can right-click on the log file, go to Send to, and click on Compressed (zipped) folder. You will be able to attach the ZIP archive to a reply. After that, you can run the eam_disable_debug_output batch file to disable debug mode. Note that your computer will need to be restarted after running the batch file. Quote Link to post Share on other sites
JakeHardy 0 Posted May 10, 2013 Author Report Share Posted May 10, 2013 Hello, attached is the file you required, i ran the program planetside2.exe Quote Link to post Share on other sites
GT500 854 Posted May 10, 2013 Report Share Posted May 10, 2013 OK, I have let our developers know that you have posted logs, and they will take a look at them as soon as possible. Quote Link to post Share on other sites
JakeHardy 0 Posted May 11, 2013 Author Report Share Posted May 11, 2013 thank you Quote Link to post Share on other sites
GT500 854 Posted May 15, 2013 Report Share Posted May 15, 2013 I got an e-mail from one of our developers earlier today, and they are confident that they were able to determine the cause of the issue. Hopefully a fix will be forthcoming soon. Quote Link to post Share on other sites
JakeHardy 0 Posted May 16, 2013 Author Report Share Posted May 16, 2013 I got an e-mail from one of our developers earlier today, and they are confident that they were able to determine the cause of the issue. Hopefully a fix will be forthcoming soon. thats awesome, thanks! Quote Link to post Share on other sites
GT500 854 Posted May 16, 2013 Report Share Posted May 16, 2013 You're quite welcome. You may want to keep an eye on this forum for the next week or two, just in case a beta update is released that deals with this issue. Quote Link to post Share on other sites
JakeHardy 0 Posted May 17, 2013 Author Report Share Posted May 17, 2013 You're quite welcome. You may want to keep an eye on this forum for the next week or two, just in case a beta update is released that deals with this issue. ok will do Quote Link to post Share on other sites
JakeHardy 0 Posted June 25, 2013 Author Report Share Posted June 25, 2013 Hello, i have been monitoring that forum you linked but that issue is still yet to be fixed, do you have a eta? Quote Link to post Share on other sites
GT500 854 Posted June 26, 2013 Report Share Posted June 26, 2013 It looks like Andrey hasn't been able to get a new beta of Online Armor ready yet. Unfortunately we don't have any ETA's (mostly because, in the software industry, you can never meet an ETA and still produce a quality product). Quote Link to post Share on other sites
JakeHardy 0 Posted June 26, 2013 Author Report Share Posted June 26, 2013 Online Armor? my issue is with Emsisosft Anti-Malware Quote Link to post Share on other sites
GT500 854 Posted June 26, 2013 Report Share Posted June 26, 2013 There have been a number of beta updates to Emsisoft Anti-Malware, and the current beta version is 8.0.0.7. Does the issue still happen with the latest beta installed? Quote Link to post Share on other sites
JakeHardy 0 Posted June 26, 2013 Author Report Share Posted June 26, 2013 yes i can confirm that the issue is still happening and that i am running version 8.0.0.7 Quote Link to post Share on other sites
GT500 854 Posted June 26, 2013 Report Share Posted June 26, 2013 I've created a new bug report in our system on this. Hopefully it will get some more attention now. Quote Link to post Share on other sites
JakeHardy 0 Posted June 26, 2013 Author Report Share Posted June 26, 2013 Awesome, Thank You Quote Link to post Share on other sites
GT500 854 Posted July 6, 2013 Report Share Posted July 6, 2013 One of our developers just let me know that they had already fixed this, and they are not able to reproduce the issue in the latest version of Emsisoft Anti-Malware. If you are still having issues, then follow the instructions I posted earlier to get us a fresh DebugView log so that I can send it to our developers. Quote Link to post Share on other sites
JakeHardy 0 Posted July 6, 2013 Author Report Share Posted July 6, 2013 OK, i'll send you another report Quote Link to post Share on other sites
JakeHardy 0 Posted July 11, 2013 Author Report Share Posted July 11, 2013 Hello, the update to 8.0.0.10 has fixed my issue and i am no longer getting prompted for updated executable Quote Link to post Share on other sites
GT500 854 Posted July 11, 2013 Report Share Posted July 11, 2013 OK, I'll pass that along to our developers. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.