Sign in to follow this  
hadi-3at

Problem with chess game

Recommended Posts

Try this:

  • Open Emsisoft Anti-Malware from the icon on the desktop.
  • Click Guard in the menu on the left.
  • Go to the File Guard tab.
  • In the lower-left corner, just above Alerts, click on the Manage whitelist link.
  • In the box under Type click the little down arrow and change it from File to Process (you may need to click in the box for the arrow appear).
  • Click in the white box below Item to make a button with three dots (...) appear, and then click the ... button.
  • Navigate to the directory where the file you wish to exclude is located, and double-click on it to add it. Here is the file you will want to add:

    C:\Program Files\Modern\ChessBase - Fritz13\ChessProgram12\ChessProgram13.exe

  • Click the OK button at the bottom when done, and close Emsisoft Anti-Malware.
  • Upvote 1

Share this post


Link to post
Share on other sites

tnx
i did all those task and software shows error again ...Even game folders put whitelist ... not work! ...This answer not complete and not worked

 I have problem via v.p.n service...In this site Why talked impermissible and edit post?  meanwhile... when remove antivirus all program normal !

Share this post


Link to post
Share on other sites

Have you changed any settings in Emsisoft Anti-Malware, such as enabling Paranoid Mode?

  • Upvote 1

Share this post


Link to post
Share on other sites

Have you changed any settings in Emsisoft Anti-Malware, such as enabling Paranoid Mode?

no... i use normal mode... I think problem and bug via emsisoft... Also game mode not worked and shows error...

Share this post


Link to post
Share on other sites

We'll probably need a DebugView log to see what is going on. Before we can get that, we'll need to set a registry entry that will tell Emsisoft Anti-Malware to output debug information that DebugView can see and save in its log. The following file eam_debug_output.zip contains two batch files. One of the will enable debug mode, and the other will disable it. Please download this file, extract the batch files from it, and run the batch file named eam_enable_debug_output (if your computer is running Windows Vista or Windows 7 then please make sure to right-click on the batch file and select to Run as administrator):

After that, please restart your computer, and then proceed with the instructions below:

  • Download DebugView from this link:
  • When downloading, make sure to save it on your Desktop instead of clicking 'Run' or 'Open'.
  • Right-click on the 'DebugView' file that you just saved on your Desktop, and select "Extract All".
  • Before running DebugView, you will need to add a process exclusion to Emsisoft Anti-Malware to prevent crashing issues. Here are the instructions:
    • Please go ahead and open Emsisoft Anti-Malware from the icon on the desktop.
    • click on Guard in the menu on the left.
    • Go to the File Guard tab.
    • Click on the Manage whitelist link on the left, just above 'Alerts'.
    • On the left, under where it says Type, click on where it says File and change it to Process.
    • Click in the white space to the right of where you just changed 'File' to 'Process', under where it says Item, and a little button with three dots on it will appear to the right.
    • Click on the button with the three dots.
    • Navigate to the folder where DebugView is saved (this should be on your desktop), select the Dbgview file, and click the Open button in the lower-right.
    • Click OK at the bottom to save the settings, and then close Emsisoft Anti-Malware.
  • Open the new DebugView folder that was created on your Desktop after extracting.
  • Windows XP and 2000 users should double-click on the file named 'Dbgview'. Windows 7 and Vista users should right-click and select "Run as Administrator".
  • Click on the 'Capture' menu, and select everything except "Log Boot" (you will have to open the menu again after clicking to select an item).
  • Do whatever it is you need to in order to replicate the issue.
  • After you have replicated the issue you can switch back to DebugView and click 'File' and "Save As" in order to save the log to a file on your Desktop.
  • Please attach that log file to a reply so that we may analyze it for errors. You will need to use the More Reply Options button to the lower-right of where you type in your reply in order to access the attachment controls.
  • Note: You may need to ZIP the log file in order to attach it. If you do not have a program such as 7-Zip, WinZip, WinRar, etc. then you can right-click on the log file, go to Send to, and click on Compressed (zipped) folder. You will be able to attach the ZIP archive to a reply.
After that, you can run the eam_disable_debug_output batch file to disable debug mode. Note that your computer will need to be restarted after running the batch file.
  • Upvote 1

Share this post


Link to post
Share on other sites

I have sent the link to the logs to our developers so that they can take a look at them.

  • Upvote 1

Share this post


Link to post
Share on other sites

I'm sorry for the slow response time. I am opening a bug report on this so that our developers can investigate further. ;)

Share this post


Link to post
Share on other sites

May I ask what VPN software you are using, and could you let me know exactly what happens when you have the issue with your VPN?

Share this post


Link to post
Share on other sites

Lets try getting a log from DebugView so that I can send it to our developers, and see if they can determine what is going wrong. Before we can get a DebugView log, we'll need to set a registry entry that will tell Emsisoft Anti-Malware to output debug information that DebugView can see and save in its log. The following file eam_debug_output.zip contains two batch files. One of the will enable debug mode, and the other will disable it. Please download this file, extract the batch files from it, and run the batch file named eam_enable_debug_output (if your computer is running Windows Vista or Windows 7 then please make sure to right-click on the batch file and select to Run as administrator):

After that, please restart your computer, and then proceed with the instructions below:

  • Download DebugView from this link:
  • When downloading, make sure to save it on your Desktop instead of clicking 'Run' or 'Open'.
  • Right-click on the 'DebugView' file that you just saved on your Desktop, and select "Extract All".
  • Before running DebugView, you will need to add a process exclusion to Emsisoft Anti-Malware to prevent crashing issues. Here are the instructions:
    • Please go ahead and open Emsisoft Anti-Malware from the icon on the desktop.
    • click on Guard in the menu on the left.
    • Go to the File Guard tab.
    • Click on the Manage whitelist link on the left, just above 'Alerts'.
    • On the left, under where it says Type, click on where it says File and change it to Process.
    • Click in the white space to the right of where you just changed 'File' to 'Process', under where it says Item, and a little button with three dots on it will appear to the right.
    • Click on the button with the three dots.
    • Navigate to the folder where DebugView is saved (this should be on your desktop), select the Dbgview file, and click the Open button in the lower-right.
    • Click OK at the bottom to save the settings, and then close Emsisoft Anti-Malware.
  • Open the new DebugView folder that was created on your Desktop after extracting.
  • Windows XP and 2000 users should double-click on the file named 'Dbgview'. Windows 7 and Vista users should right-click and select "Run as Administrator".
  • Click on the 'Capture' menu, and select everything except "Log Boot" (you will have to open the menu again after clicking to select an item).
  • After selecting the options in the 'Capture' menu, click on the 'File' menu and select "Log to File As" and create a file on your desktop for it to save the log to.
  • Do whatever it is you need to in order to replicate the issue.
  • After the system freezes, restart your computer (you may need to hold down the power button for about 4 or 5 seconds to shut it down first), and make sure that the log was saved on your desktop.
  • Please attach that log file to a reply so that we may analyze it for errors. You will need to use the More Reply Options button to the lower-right of where you type in your reply in order to access the attachment controls.
  • Note: You may need to ZIP the log file in order to attach it. If you do not have a program such as 7-Zip, WinZip, WinRar, etc. then you can right-click on the log file, go to Send to, and click on Compressed (zipped) folder. You will be able to attach the ZIP archive to a reply.
After that, you can run the eam_disable_debug_output batch file to disable debug mode. Note that your computer will need to be restarted after running the batch file.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.