Speedster159 1 Report post Posted June 25, 2017 I'm trying to open a couple of ports for a game and the settings are. Allow IN/OUT UDP PORT ALL I'm on a private network and the rule is above the 2 blocks on the bottom. I also opened up my local IP to DMZ and when I test the port I get "Connection Refused" on CanYouSeeMe.org and Closed on WhatsMyIP.org Share this post Link to post Share on other sites
Speedster159 1 Report post Posted June 25, 2017 I'm running Windows 10 Pro Build 14393 Share this post Link to post Share on other sites
JeremyNicoll 45 Report post Posted June 25, 2017 Your description suggests that something in the 'Traffic handled by application rules' section might be blocking things. A quick way to check would be to move your new rules above that section. But that's clearly not a good idea in the longer term. EIS does make detailed logs of firewall decisions, but they are placed in "debug logs" which most people do not usually have turned on. It might be useful for you to turn them on to see if the FW log files give you any clues. For turning on debug logs see the standard instructions, in eg this thread:https://support.emsisoft.com/topic/27649-wifi-connection-fails-during-logon-to-computer/ Share this post Link to post Share on other sites
GT500 495 Report post Posted June 27, 2017 I'd recommend not putting your system on a DMZ in your router config when EIS is configured for a "Private" network. As for your rule, did you try moving it to the top of the list of firewall rules? Any rule above it would supersede it. Share this post Link to post Share on other sites
