Drake 0 Posted July 5, 2011 Report Share Posted July 5, 2011 Yesterday I runned update and CLI scanner binaries was updated to new version 5.1.0.3. After that each time I run scan with 5.1.0.3 it crashes. When I restore to 5.1.0.2 it works without problems. Parameters: a2cmd.exe /f=scanfolder /r /a /n /dq /log=!!Log.txt EurekaLog 6.0.24Application: ---------------------------------------------------------- 1.1 Start Date : Tue, 5 Jul 2011 14:13:29 +0200 1.2 Name/Description: a2cmd.exe - (Command Line Scanner) 1.3 Version Number : 5.1.0.3 1.4 Parameters : .txt 1.5 Compilation Date: Wed, 29 Jun 2011 17:04:49 +0200 1.6 Up Time : 8 seconds Exception: --------------------------------------------------------------------- 2.1 Date : Tue, 5 Jul 2011 14:13:37 +0200 2.2 Address : 7C812AF6 2.3 Module Name : kernel32.dll - (Windows NT BASE API Client DLL) 2.4 Module Version: 5.1.2600.5781 2.5 Type : EInOutError 2.6 Message : Unable to create directory. 2.7 ID : D903 2.8 Count : 1 2.9 Status : New 2.10 Note : User: ------------------------------------------------------- 3.1 ID : Drake 3.2 Name : COMPUTER 3.3 Email : [email protected] 3.4 Company : 3.5 Privileges: SeChangeNotifyPrivilege - ON SeSecurityPrivilege - OFF SeBackupPrivilege - OFF SeRestorePrivilege - OFF SeSystemtimePrivilege - OFF SeShutdownPrivilege - OFF SeRemoteShutdownPrivilege - OFF SeTakeOwnershipPrivilege - OFF SeDebugPrivilege - OFF SeSystemEnvironmentPrivilege - OFF SeSystemProfilePrivilege - OFF SeProfileSingleProcessPrivilege - OFF SeIncreaseBasePriorityPrivilege - OFF SeLoadDriverPrivilege - ON SeCreatePagefilePrivilege - OFF SeIncreaseQuotaPrivilege - OFF SeUndockPrivilege - ON SeManageVolumePrivilege - OFF SeImpersonatePrivilege - ON SeCreateGlobalPrivilege - ON Active Controls: ------------------------------------------------ 4.1 Form Class : ConsoleWindowClass 4.2 Form Text : C:\WINDOWS\system32\cmd.exe 4.3 Control Class: 4.4 Control Text : Computer: ----------------------------------------------------------------------------------------- 5.1 Name : COMPUTER-EF98B6 5.2 Total Memory : 1535 Mb 5.3 Free Memory : 509 Mb 5.4 Total Disk : 37,16 Gb 5.5 Free Disk : 1,89 Gb 5.6 System Up Time: 7 hours, 34 minutes, 43 seconds 5.7 Processor : Intel® Pentium® 4 CPU 2.80GHz 5.8 Display Mode : 1024 x 768, 32 bit 5.9 Display DPI : 96 5.10 Video Card : NVIDIA GeForce4 MX 440 with AGP8X (driver 6.14.10.9371 - RAM 64 MB) 5.11 Printer : Operating System: ------------------------------------ 6.1 Type : Microsoft Windows XP 6.2 Build # : 2600 6.3 Update : Service Pack 3 6.4 Language: Serbian (Latin) 6.5 Charset : 204 Network: --------------------------------------------------------------------- 7.1 IP Address: 192.168.001.002 - 192.168.042.001 - 192.168.153.001 7.2 Submask : 255.255.255.000 - 255.255.255.000 - 255.255.255.000 7.3 Gateway : 192.168.001.001 - 000.000.000.000 - 000.000.000.000 7.4 DNS 1 : 192.168.001.001 - 000.000.000.000 - 000.000.000.000 7.5 DNS 2 : 000.000.000.000 - 000.000.000.000 - 000.000.000.000 7.6 DHCP : OFF - OFF - OFF Any idea what is cause of the problem? I'm using XP SP3 with KAV 12.0.0.374(a) and CFW 5.5 but I don't think they are problem. Quote Link to post Share on other sites
Lynx 34 Posted July 5, 2011 Report Share Posted July 5, 2011 Hi Drake, welcome to the forum I ran the latest CLS v 5.1.0.3 after reading your post using the set of parameters as in your example There were no crashes. See images below. I had to post the screen output in 2 parts The log file created attached as well. All test suspects were perfectly deleted (scanned using full EAM afterwards) The only small question is the strange output as highlighted in the “_part_#2” image … I've never seen that before. At the same time the log file does not contain such “mysterious” output string I hope that developers can explain the meaning My regards p.s. Did you have a prompt for sending crash report to the developers with your e-mail & comments? Usually you should have the said option. If so, it is better to send the report straight to Emsisoft team Quote Link to post Share on other sites
Drake 0 Posted July 5, 2011 Author Report Share Posted July 5, 2011 I had a prompt and I sent crash report. Quote Link to post Share on other sites
Lynx 34 Posted July 5, 2011 Report Share Posted July 5, 2011 Thanks for the reply, Drake Please try to set output for the log file explicitly as in my example (/log=F:\Log.txt) It seems like I was able to reproduce the crash now when using "!!Log.txt" as you stated getting the same 2.6 Message : Unable to create directory. Most likely that's a problem When running my test I copied the parameters string as in your post,... but then edited the last bit automatically My regards Quote Link to post Share on other sites
Drake 0 Posted July 5, 2011 Author Report Share Posted July 5, 2011 It generate error with: a2cmd.exe /f=scanfolder /r /a /n /dq /log=Log.txt However I noticed it doesn't crash when I exclude /log switch. I think I'm found what is a problem. New version doesn't consider a2cmd.exe folder as current directory for /log and /l switch or it is trying to create folder with name of file so when I run scan with those parameters: a2cmd.exe /f=scanfolder /r /a /n /dq /log="%CD%\!!Log.txt" it works like charm. Lynx, big thanks. Regards. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.